Front view of
Cat.6A UTP Toolless Keystone Jack
Rear view of
Cat.6A UTP Toolless Keystone Jack
Drawing of
Cat.6A UTP Toolless Keystone Jack
YH-7013-U5E
Cat.5E UTP Toolless Keystone Jack
YH-7013-U6
Cat.6 UTP Toolless Keystone Jack
YH-7013-U6A
Cat.6A UTP Toolless Keystone Jack
Features:
Toolless Termination
Supports Gigabit Ethernet
ETL Verified
Two piece simple to use design
Suitable for
patch panel and faceplate mounting
Product Overview
The YUHUI
Unscreened Keystone Jack, is a toolless termination RJ45 socket suitable for mounting in range of housings from
patch panels,
faceplates and shutters to sub floor boxes, and work areas distribution enclosures. The socket itself is housed in a high quality ABS plastic housing, which opens at the rear in a butterfly manner to reveal the IDC termination points. Once the conductors of the cable to be terminated are fed into a wire cap the process is completed by snapping the 'butterfly wings' together with minimal, but firm pressure. A choice of
Patch Panel frames with either 16 or 24 port density in both black and chrome are available.
Performance / Specification Table
Specification: Category 5e ANSI/TIA/EIA 568 B.2
Wiring Specification: T568A & T568B
Dimensions: 17.00mm wide x 35.15mm deep x 25.20mm high
Installation Recommendation: Suits minimum of 37mm back boxes when installed with bevelled
faceplate RJ45 Jack: Min. life 750 insertions
RJ45 Jack: 3-50 Micro inch Gold Plated contact pins
IDC Wire Gauge: 22 to 26 AWG
NEXT at 250MHz Category 5e 39.5dB @100MHz (Power Sum)
FEXT at 250MHz Category 5e 30.4dB @100MHz (Power Sum)
Storage Temperature Range: -40 to +70°C Operational Temperature Range: -10 to +60°C
Relative Humidity: Maximum non condensing 93%
Jack Housing: High Impact Flame Retardant Plastic UL 94V-0
Typical Applications
1000BASE T Gigabit Ethernet
10Base T Ethernet
155Mbps ATM
100BASE TX Fast Ethernet
622Mbps ATM
