Cat 6A RJ45 Shielded Keystone Jack operating instructure
1. Put the cable on the holder and cut the cable
2. Press the holder into Jack body for Crimping
3. Testing on Fluke
4. Finish
Similar type is YH-7013
The type of YH-7101 is
small size than YH-7013
Features:
Small size : L: 30MM W: 16MM H:22MM
Toolless Termination
ETL Verified
Two piece simple to use design
Suitable for
patch panel and faceplate mounting
Product Overview
The YUHUI
Cat 6A RJ45 Shielded Keystone Jack, is a toolless termination RJ45 socket suitable for mounting in range of housings from
patch panels,
faceplates and shutters to sub floor boxes, and work areas distribution enclosures. Once the conductors of the cable to be terminated are fed into a wire cap the process is completed by snapping the 'butterfly wings' together with minimal, but firm pressure. A choice of
Patch Panel frames with either 16 or 24 port density in both black and chrome are available.
Performance / Specification Table
Wiring Specification: T568A & T568B
Installation Recommendation: Suits minimum of 37mm back boxes when installed with bevelled
faceplate RJ45 Jack: Min. life 750 insertions
RJ45 Jack: 3-50 Micro inch Gold Plated contact pins
IDC Wire Gauge: 22 to 26 AWG
NEXT at 250MHz Category 5e 39.5dB @100MHz (Power Sum)
FEXT at 250MHz Category 5e 30.4dB @100MHz (Power Sum)
Storage Temperature Range: -40 to +70°C Operational Temperature Range: -10 to +60°C
Relative Humidity: Maximum non condensing 93%
Typical Applications
1000BASE T Gigabit Ethernet
10Base T Ethernet
155Mbps ATM
100BASE TX Fast Ethernet
622Mbps ATM
